iSpect Home Inspections, Inc.

Call Directions Website Contact the business

iSpect Home Inspections, Inc. Inspecting Your House Right To Make It Your Home. An inspection so thorough it’s backed by InterNACHI’s buy back guarantee.

I see this all the time. Contractors go into your attic to add recessed lights, repair or replace HVAC equipment, or do ...
10/02/2026

I see this all the time. Contractors go into your attic to add recessed lights, repair or replace HVAC equipment, or do plumbing work and move insulation out of their way to do the work. Frequently the insulation isn’t put back into place. This is a drain on energy dollars as well as a problem for moisture and mold in your attic. Always look into your attic to ensure the insulation has been returned to its original position. With electrical there can be an issue with the housing for the lights. If they are IC rated (insulation contact rated) then the insulation can go over the housing. There will be “IC rated” somewhere on the housing if this is the case. Otherwise leave a gap so the insulation does not touch the housing. You should not have the large gaps pictured here.

During the attic conversion to living space the room was arced with a strip of missed insulation. It may have been some ...
06/08/2026

During the attic conversion to living space the room was arced with a strip of missed insulation. It may have been some old ductwork that was left in place. It wasn’t in use now as the central air conditioning was running at the time of the pictures. That would have made a deep blue infrared image. With 73 degrees radiating into the room on a mild day, it would make this room difficult to cool in the summer and conversely heat in the winter. At this point some sheetrock would have to be removed to assess what’s there before insulating.

Here’s a solution to frequently having to fill the dispenser for your countertop dishwashing liquid. During this I happe...
04/10/2026

Here’s a solution to frequently having to fill the dispenser for your countertop dishwashing liquid. During this I happened to change everything, but that’s not necessary. Pull the plastic tube out from the bottom of the pump mechanism. Push in the standard tubing for water filters and refrigerator water supply. It will usually be the same size. Unscrew the present bottle from under the sink. Reset the pump into place and insert the tube into the bottle of dishwashing liquid. Make sure you leave enough length so the tube reaches the bottom of the bottle. Leave extra, you can always trim off more if needed. On this bottle the hole in the cap happened to be the exact size. If not you can always drill a small hole. It takes a dozen or more pumps to get the dishwashing liquid all the way through the tube to the pump the first time. After that it will function normally. Thanks to my son-in-law, MP3, for turning me on to this idea!

The correct way to flash a chimney to a roof is to have the top layer of flashing, counter flashing, embedded into a mor...
02/20/2026

The correct way to flash a chimney to a roof is to have the top layer of flashing, counter flashing, embedded into a mortar joint, then sealed. What I see frequently is flashing wrapped around the chimney then caulked at the top. This may shed water for a while, but the caulk sealant at the top will need to be reapplied occasionally to keep the area sealed. The correct way requires far less ongoing maintenance. There’s a pretty shoddy attempt at repointing the mortar here as well.

Attic insulation can save your roof. Two neighbors roofs are pictured, both facing East. The snow covered one has adequa...
02/03/2026

Attic insulation can save your roof. Two neighbors roofs are pictured, both facing East. The snow covered one has adequate attic insulation to keep the heat in the home. The second has a consistent melt to the eaves where the snow remains. Heat escaping into the attic is melting the snow. The cold under the eaves is keeping snow and ice there. This can lead to ice dams and water intrusion/damage.

It’s always recommended to have an electrician check the compatibility of dissimilar breakers in your electric panel. Th...
12/10/2025

It’s always recommended to have an electrician check the compatibility of dissimilar breakers in your electric panel. This one, a Square D breaker in a GE panel, obviously doesn’t fit. Even a visual observation shows that the physical characteristics don’t allow it to fit within the panel opening properly. For any dissimilar breaker an electrician should check the attachment to the bus bar behind the breaker to ensure a safe and proper connection.

I’ve been running new pipe for my heating system. Several pipes embedded in the slab were leaking. For ease of use, both...
12/02/2025

I’ve been running new pipe for my heating system. Several pipes embedded in the slab were leaking. For ease of use, both with the flexibility of the pipe and ease of connections, the product I decided to use was expandable PEX. I’ve heard from every HVAC contractor I know that, if properly installed, they have never seen a leak. I was curious about this connection so I cut a cross section. The seal appears amazingly tight. Using a power PEX expanding tool made the job quick and easy. I’m a fan!

The first picture shows an extension cord cut and wired directly into the electrical panel. The second is a properly ins...
10/10/2025

The first picture shows an extension cord cut and wired directly into the electrical panel. The second is a properly installed outlet added next to the panel. Besides being an electrical violation, incredibly unsafe, not GFCI protected, and at a level any child can access, it’s also not even cost effective. If the homeowner was “smart enough” to know how to wire something into the panel then using approved materials would have been about the same price as destroying an extension cord.

Crawlspace problems! The dryer exhaust empties into the crawlspace dumping moisture there which can lead to mold and woo...
09/29/2025

Crawlspace problems! The dryer exhaust empties into the crawlspace dumping moisture there which can lead to mold and wood decay. A plastic v***r barrier was on the dirt floor, but it should be sealed to the walls. Electric and gas lines were hanging loose instead of properly secured. Insulation was missing between the above floor joists.

Poorly built, poorly maintained, poorly repaired. Some decks just scream “replace me!”
06/23/2025

Poorly built, poorly maintained, poorly repaired. Some decks just scream “replace me!”

Address

Valley Cottage, NY
10989

Opening Hours

Monday 8am - 10pm
Tuesday 8am - 10pm
Wednesday 8am - 10pm
Thursday 8am - 10pm
Friday 8am - 10pm
Saturday 8am - 8pm
Sunday 9am - 8pm

Telephone

+19145849100

Website

Alerts

Be the first to know and let us send you an email when iSpect Home Inspections, Inc. posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to iSpect Home Inspections, Inc.:

Shortcuts

Share

Category