Utah Mold Pros

Directions Website Contact the business

Utah Mold Pros Our ACAC-certified mold inspector brings 10+ years of life sciences experience.

We prioritize finding the source of the problem—because mold testing is only effective when backed by a thorough, property-wide inspection you can trust. At UMP (Utah Mold Pros), we specialize in helping families and homeowners create healthier indoor environments through precise, science-backed testing. Our work goes beyond basic mold and air quality assessments—we identify hidden contaminants that can silently impact your health and home.

One of the most common places we find hidden moisture? Under the sink.During a recent assessment, we discovered a slow p...
10/28/2026

One of the most common places we find hidden moisture? Under the sink.

During a recent assessment, we discovered a slow plumbing leak that had saturated the cabinet floor, with mold growth spreading into an adjacent drawer.

The homeowner had no idea.

🔎 Take 30 seconds to check beneath your sinks:

* Warped or stained wood
* Musty odors
* Damp cabinetry or plumbing connections

Catching a leak early could mean the difference between a simple plumbing repair and costly mold remediation.

05/26/2026

Everything looked fine… then the insulation got pulled out.

Hidden fungal growth was still present within portions of the wall assembly despite the area reportedly being “taken care of.”

This is why clearance and proper verification matter.

Just because materials look clean from the outside doesn’t necessarily mean the underlying moisture issue was resolved — or that all impacted materials were properly addressed.

One of the most common problems we see:
• Wet insulation left inside wall cavities
• Partial material removal
• No containment
• Framing left with elevated moisture
• Areas closed back up before assemblies fully dried

Moisture problems are building science problems, not cosmetic problems.

The goal shouldn’t just be to make things look clean. The goal is returning the structure back to a normal, dry condition.

If something still feels off after remediation, trust your gut and get a second opinion.

Utah Mold Pros
Science. Source. Peace of mind.

05/21/2026

And the General Contractor told them to just let it air dry…

• Visible fungal growth throughout the area, later confirmed as Chaetomium and Stachybotrys
• Moisture readings nearing 100% throughout portions of the kitchen flooring and cabinetry
• No containment. No drying equipment. No anything.
• Homeowner was told to spray vinegar and baking soda on it and call it good…

Excuse my language, but what the f**k?

I’m sure some contractors mean well, but this is exactly why homeowners should question advice that doesn’t feel right. Moisture problems and microbial growth are building science issues, not “let it dry and hope for the best” situations.

I’m glad the homeowner trusted their gut and called a professional before things became significantly worse.

If you need a second opinion or simply want peace of mind, reach out to Utah Mold Pros.

Science. Source. Peace of mind.

moisture

05/17/2026

Sometimes your windows are trying to tell you something.

Condensation buildup.
Water intrusion after storms.
Musty odors.
Visible mold growth around the frame or sill.

Many times, the issue isn’t “just mold” — it’s air leakage and moisture intrusion.

Small gaps around windows can allow humid air and water to enter the building assembly, leading to condensation, elevated moisture, and eventually microbial growth.

In some cases, the fix may be as simple as:
• Replacing weather stripping
• Resealing the window
• Or replacing a failing window assembly

Mold is often the symptom. Moisture is the problem.

Don’t just clean the surface — identify the source.

Utah Mold Pros
Science. Source. Peace of mind.

indoorairquality iaq moisture windowcondensation moldinspection waterdamage healthyhomes buildingscience

05/15/2026

Case Study: The Smell Was the Clue

Homeowners noticed a foul odor coming from the bathroom but couldn’t figure out the source.

After a full moisture assessment and literally following the smell room-to-room, the trail led to the shower.

The issue?
Water was trapped beneath the gel coat due to an improperly sealed drain assembly. Turns out, several homes in the area had the same construction defect.

Further investigation later confirmed the presence of water-damage indicator molds, including Stachybotrys.

Moral of the story:
Don’t ignore your nose.

Our noses may not be as sensitive as a dog’s, but they’re still powerful warning systems.

Weird smell?
History of water damage?
Just want to understand what’s in your indoor environment?

Don’t guess. Test. Get to the source.

Utah Mold Pros
Science. Source. Peace of mind.

05/13/2026

Dishwashers are one of the most overlooked hotspots for moisture and microbial growth in a home 👀

Utah Mold Pros
Science. Source. Peace of mind.

05/12/2026

Sometimes it feels like I’m playing hide and seek with moisture and mold.

Checking behind baseboards.
Under carpets.
Crawling through attics.
Scanning walls with thermal imaging.
Following subtle clues most people would never notice.

And honestly?

There’s a small part of me that gets excited when I actually find the source.

Not because mold is “good” but because hidden moisture problems finally start making sense:
• The musty odor
• The recurring symptoms
• The warped building materials
• The humidity that never felt right

Finding the source means there’s finally a path toward solving it.

That’s the difference between guessing… and investigating.

Utah Mold Pros
Science. Source. Peace of mind.

utah moisture indoorairquality

05/12/2026

Not every moisture issue needs expensive testing to recognize.

Sometimes, the signs are obvious.

In bathrooms used by young children, repeated splashing and humidity can lead to bubbling paint, swollen baseboards, or peeling finishes — all common indicators of moisture intrusion.

Could a moisture meter confirm it? Sure. But when you already have:
• Repeated water exposure
• Visible material damage
• A high-moisture environment

…it’s reasonable to suspect moisture behind the material.

In situations like this, you may not need a professional. Carefully remove the affected baseboard, inspect for visible growth, dry the area thoroughly, and replace damaged material if needed.

Simple habits matter:
• Use bathroom fans
• Re-caulk tubs and sinks
• Dry standing water quickly

Small moisture problems are often manageable when addressed early.

Utah Mold Pros
Science. Source. Peace of mind.

Moms notice everything.The strange smell.The humidity in the bathroom.The cough that only happens at home.The ceiling st...
05/10/2026

Moms notice everything.

The strange smell.
The humidity in the bathroom.
The cough that only happens at home.
The ceiling stain everyone else ignored.

Mothers are often the first to recognize when something feels “off” in a home.

This Mother’s Day, we want to recognize the women working every day to create healthier spaces for their families.

Happy Mother’s Day from Utah Mold Pros 💐

Science. Source. Peace of mind.

What Actually Makes a Mold Inspection?One of the biggest misconceptions we see is the idea that mold inspections are sim...
05/10/2026

What Actually Makes a Mold Inspection?

One of the biggest misconceptions we see is the idea that mold inspections are simply “air tests.”

Air sampling can be useful in certain situations, but by itself, it does not identify the source of a moisture problem, explain why conditions developed, or provide a full understanding of the environment.

A proper mold inspection is typically a moisture-focused investigation that may include:
• Visual assessment
• Moisture mapping
• Thermal imaging
• Humidity and temperature readings
• HVAC evaluation
• Building science principles
• Targeted mold testing when appropriate

Mold growth generally occurs because of moisture. The real goal of an inspection should be identifying and understanding the conditions allowing growth to occur.

This is also why two homes with similar air sample results may have completely different underlying issues.

Testing without context can sometimes lead to confusion, incomplete conclusions, or missed moisture sources.

Whether you’re a homeowner, renter, buyer, seller, or real estate professional, it’s important to understand that mold inspections are about much more than collecting air samples.

Utah Mold Pros
Science. Source. Peace of mind.

Address

South Jordan, UT
84009

Opening Hours

Monday 7am - 7:30pm
Tuesday 7am - 7:30pm
Wednesday 7am - 7:30pm
Thursday 7am - 7:30pm
Friday 7am - 5pm
Saturday 7am - 5pm
Sunday 7am - 5pm

Website

,

Alerts

Be the first to know and let us send you an email when Utah Mold Pros posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to Utah Mold Pros:

Shortcuts

Share

Category

Nearby realtors & realty services

Other Home Inspections in South Jordan

Show All